Home » ZyXEL Manuals » Webcams » ZyXEL IPC3605N » Manual Viewer

ZyXEL IPC3605N User Guide - Page 52

Firmware Update, background applications.

Add to My Manuals
Save this manual to your list of manuals

Page 52 highlights

7.3.3 Firmware Update Firmware updates are available at us.zyxel.com/support. After downloading the latest firmware for your camera, click the [Browse] button to locate the firmware file on your hard drive, then click the [Upgrade] button to update the camera's firmware. Once the upgrade process begins, it must not be interrupted or you risk permanently damaging your camera. If some icons are out of place after reboot, press [Ctrl] + [F5] to force your browser to refresh its cache. Caution: Before updating firmware, close all other browser windows and background applications. Note: Should you accidentally close your browser's window during the upgrade process, DO NOT unplug the power cable or reset the camera immediately. Try waiting 3-5 minutes, as the camera may complete the upgrade process on its own.

Section	Page
2 Getting to know your IPC-3605N	6
2.1 Package Contents	6
2.2 Features	7
2.3 Camera Layout	8
2.4 LED Status Indicator	9
2.5 Digital I/O Connector Block	10
The I/O connector on the back of the camera provides a central interface between your home security system and various input devices.	10
The two digital inputs are normally used with security sensors. They work by detecting a change in the state of an open or closed circuit. You can check the status of the circuit in [Setup] > [Event Setup] > [I/O Status]	10
The output port is normally used to trigger external audio or visual indicators, like sirens or strobe lights.	10
3 Installation	11
3.1 Connecting your IPC-3605N	11
3.2 Wireless	12
3.3 Wall and Ceiling Mounting	13
3.4 Dismounting the Camera	14
3.5 Disassemble/Assemble the camera stand	15
4 Initial Setup	16
4.1 Adjusting the Focus	16
After initial setup, the camera’s focus will need to be adjusted. In order to adjust focus, aim the camera at the area you wish to monitor and gently turn the focus adjustment ring, located at the front of the camera. Turning the ring clockwise will move the focus farther away, while turning counterclockwise will move the focus closer.	16
Important: Do not over-tighten the adjustment ring, as this may damage the unit.	16
Accessing your camera	17
4.2 CloudEnabled™ Viewing	18
4.3 Direct Viewing of your Camera (For Advanced Users)	20
5 Configuration	27
5.1 Video Settings	27
5.2 Camera Settings	28
5.3 Audio Settings	30
5.4 User Settings	30
5.5 Network Settings	32
5.6 Event Setup	38
5.7 Recording Setup	45
5.8 Recording History	46
5.9 Date	46
5.10 Multi-Camera	47
6 Event Viewer	49
7 Maintenance	50
7.1 Information	50
7.2 Log	50
7.3 System Maintenance	50
8 Troubleshooting	53
8.1 Reconfiguring Your Device	53
8.2 Cabling Check	53
8.3 Resetting to Factory Defaults	54
8.4 Trouble with Active X	55
8.5 Trouble with Remote Viewing on Browser	57
8.6 Symptoms, Causes, and Solutions	59
9 Technical Specifications	64
10 Open-Sourced Components	66
GNU LIBRARY GENERAL PUBLIC LICENSE	74
GNU GENERAL PUBLIC LICENSE	82
Preamble	82
TERMS AND CONDITIONS	83
0. Definitions.	83
1. Source Code.	83
2. Basic Permissions.	84
3. Protecting Users' Legal Rights From Anti-Circumvention Law.	84
4. Conveying Verbatim Copies.	85
5. Conveying Modified Source Versions.	85
6. Conveying Non-Source Forms.	85
7. Additional Terms.	87
8. Termination.	87
9. Acceptance Not Required for Having Copies.	88
10. Automatic Licensing of Downstream Recipients.	88
11. Patents.	88
12. No Surrender of Others' Freedom.	89
13. Use with the GNU Affero General Public License.	89
14. Revised Versions of this License.	90
15. Disclaimer of Warranty.	90
16. Limitation of Liability.	90
17. Interpretation of Sections 15 and 16.	90

Match case Limit results 1 per page

7.3.3

Firmware Update

Firmware updates are available at us.zyxel.com/support. After downloading the latest

firmware for your camera, click the [Browse] button to locate the firmware file on your

hard drive, then click the [Upgrade] button to update the camera’s firmware. Once the

upgrade process begins, it must not be interrupted or you risk permanently damaging

your camera.

If some icons are out of place after reboot, press [Ctrl] + [F5] to force your browser to

refresh its cache.

Caution:

Before updating firmware, close all other browser windows and

background applications.

Note: Should you accidentally close your browser’s window during the

upgrade process, DO NOT unplug the power cable or reset the camera

immediately. Try waiting 3-5 minutes, as the camera may complete the

upgrade process on its own.