ZyXEL LTE7490-M904 User Guide - Page 137

Chapter 8 Home Networking The following table describes the labels in this screen. Table 42 Network Setting > Home Networking > Static DHCP LABEL DESCRIPTION Static DHCP Configuration # Status MAC Address Click this to configure a static DHCP entry. This is the index number of the entry. Active The MAC (Media Access Control) or Ethernet address on a LAN (Local Area Network) is unique to your computer (six pairs of hexadecimal notation). IP Address Modify A network interface card such as an Ethernet adapter has a hardwired address that is assigned at the factory. This address follows an industry standard that ensures no other adapter has a similar address. This field displays the IP address relative to the # field listed above. Click the Edit icon to configure the connection. Click the Delete icon to remove the connection. If you click Static DHCP Configuration in the Static DHCP screen, the following screen displays. Figure 92 Static DHCP: Static DHCP Configuration The following table describes the labels in this screen. Table 43 Static DHCP: Configuration LABEL DESCRIPTION Active Select Enable to activate static DHCP in your Zyxel Device. Group Name This displays the Group Name, usually Default. IP Type The IP Type is normally IPv4 (non-configurable). Select Device Info Select between Manual Input which allows you to enter the next two fields (MAC Address and IP Address); or selecting an existing device would show its MAC address and IP address. MAC Address Enter the MAC address of a computer on your LAN if you select Manual Input in the previous field. IP Address Enter the IP address that you want to assign to the computer on your LAN with the MAC address that you will also specify if you select Manual Input in the previous field. LTE Series User's Guide 137