ZyXEL MAX208M User Guide - Page 112
Alg, Table 42, Label, Description
View all ZyXEL MAX208M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
Chapter 7 Network Setting Note: The configuration you set in this screen takes priority than the Network Setting > NAT > Port Forwarding screen. Figure 60 DMZ Screen This screen contains the following fields: Table 42 DMZ LABEL DMZ Enable DMZ Host DESCRIPTION Click this check box to enable DMZ. Enter the IP address of your network DMZ host, if you have one. 0.0.0.0 means this feature is disabled. 7.17 ALG Use these settings to bypass NAT on your WiMAX Device for those applications that are "NAT unfriendly". Click Network Setting > NAT > ALG to open this screen as shown next. Figure 61 ALG Screen This screen contains the following fields: Table 43 ALG LABEL DESCRIPTION Enable FTP ALG Turns on the FTP ALG to detect FTP (File Transfer Program) traffic and helps build FTP sessions through the WiMAX Device's NAT. Enable H.323 ALG Turns on the H.323 ALG to detect H.323 traffic (used for audio communications) and helps build H.323 sessions through the WiMAX Device's NAT. Enable IPsec ALG Turns on the IPsec ALG to detect IPsec traffic and helps build IPsec sessions through the WiMAX Device's NAT. Enable L2TP ALG Turns on the L2TP ALG to detect L2TP traffic and helps build L2TP sessions through the WiMAX Device's NAT. Enable PPTP ALG Turns on the PPTP ALG to detect PPTP traffic and helps build PPTP sessions through the WiMAX Device's NAT. 112 WiMAX Device Configuration User's Guide