ZyXEL MAX208M User Guide - Page 85
Wide Scan
View all ZyXEL MAX208M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 85 highlights
Chapter 6 WiMAX Table 20 Connect (continued) LABEL DESCRIPTION RSSI (dBm) This field displays the Received Signal Strength Indication (RSSI), which is an overall measurement of radio signal strength. A higher RSSI level indicates a stronger signal. CINR (dB) R3/ This field displays the average Carrier to Interference plus Noise Ratio for the R1 current connection. This value is an indication of overall radio signal quality, where a higher value means a better quality signal. Search Click this to have the WiMAX Device scan for base stations in the frequency band(s) listed in the Applied Frequency Information table. Connected BS Info Device Status This field displays the WiMAX Device current status for connecting to the selected base station. UMAC State • Scanning - The WiMAX Device is scanning for available base stations. • Ready - The WiMAX Device has finished scanning and you can connect to a base station. • Connecting - The WiMAX Device attempts to connect to the selected base station. • Connected - The WiMAX Device has successfully connected to the selected base station. This field displays the status of the WiMAX connection between the WiMAX Device and the base station. • Network Search - The WiMAX Device is scanning for any available WiMAX connections. • Disconnected - No WiMAX connection is available. • Network Entry - A WiMAX connection is initializing. • Normal - The WiMAX connection has been successfully established. BSID This field displays the MAC address of the base station to which the WiMAX Device is connected. Frequency (MHz) This field displays the frequency the base station uses in megahertz (MHz). RSSI (dBm) This field displays the Received Signal Strength Indication (RSSI), which is an overall measurement of radio signal strength. A higher RSSI level indicates a stronger signal. CINR (dB) This field displays the average Carrier to Interference plus Noise Ratio for the current connection. This value is an indication of overall radio signal quality, where a higher value means a better quality signal. Connected NSP Info NSP ID This field displays the NSP ID of the connected NSP. Name This field displays the name of the connected NSP. Network Type This field displays the network type of the connected NSP. 6.10 Wide Scan This screen allows you to discover base stations by entering one or more frequency ranges and bandwidth on which to scan. WiMAX Device Configuration User's Guide 85