ZyXEL MC1000-SFP-FP User Guide - Page 15
Fiber-optic Connection
View all ZyXEL MC1000-SFP-FP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
CHAPTER 2 Fiber-optic Connection 2.1 Overview To make the MC1000-SFP-FP fiber-optic connection you need to: 1 Open the MC1000-SFP-FP 2 Disable DIP switch 1 (LFS) 3 Install an SFP transceiver 4 Attach the wire mounts 5 Insert a fiber-optic cable through a bushing and wrap it around the wire mounts 6 Connect the fiber-optic cable to the SFP transceiver 7 Enable DIP switch 1 (LFS) 1 Only qualified technicians should perform these actions! Please skip this chapter if you are not a qualified technician. 2.2 Open the MC1000-SFP-FP 1 First remove both screws from the housing. Figure 5 Remove The Housing Screws 2 Then lift open the cover as shown. MC1000-SFP-FP User's Guide 15
MC1000-SFP-FP User’s Guide
15
C
HAPTER
2
Fiber-optic Connection
2.1
Overview
To make the MC1000-SFP-FP fiber-optic connection you need to:
1
Open the MC1000-SFP-FP
2
Disable DIP switch 1 (LFS)
3
Install an SFP transceiver
4
Attach the wire mounts
5
Insert a fiber-optic cable through a bushing and wrap it around the wire mounts
6
Connect the fiber-optic cable to the SFP transceiver
7
Enable DIP switch 1 (LFS)
Only qualified technicians should perform these actions! Please skip this
chapter if you are not a qualified technician.
2.2
Open the MC1000-SFP-FP
1
First remove both screws from the housing.
Figure 5
Remove The Housing Screws
2
Then lift open the cover as shown.