ZyXEL NWA5560-N Quick Start Guide - Page 7

NWA Managed Access Point User's Guide Static Discovery Manually enter the IP address of the NXC on the NWA. You can enter up to two IP addresses for the NXC. Router# configure terminal Router(config)# capwap ap ac-ip 192.168.1.1 192.168.1.2 Router(config)# show capwap ap discovery-type Discovery type : Static AC IP Enter configuration mode These are the NXC IP addresses Confirm that static discovery is used to find the NXC. AC is the AP Controller, that is, the NXC. Dynamic Discovery via DHCP server If the NWA gets a dynamic IP address from a DHCP server, you can simultaneously let it get the NXC IP address by configuring it in the DHCP server using DHCP Option 138. You can configure up to two NXC IP addresses on the DHCP server. Test the Connection Ping the NXC from the NWA to test the connection. Router# ping 192.168.1.1 (the NXC IP address) PING 192.168.1.1 (192.168.1.254) 56(84) bytes of data. If it fails, configure the gateway IP address of the NWA. Router# configure terminal Router(config)# capwap ap vlan ip gateway 192.168.1.32 If the NWA and NXC are in a VLAN, configure the VLAN ID (tagged or untagged) using this command: • capwap ap vlan vlan-id VID { tag | untag } (VID from 1 to 4094) 7