ZyXEL NXC5200 User Guide - Page 469
Console Speed, DNS Overview
View all ZyXEL NXC5200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
Chapter 33 System 33.4 Console Speed This section shows you how to set the console port speed when you connect to the NXC via the console port using a terminal emulation program. See Table 2 on page 32 for default console port settings. Click Configuration > System > Console Speed to open this screen. Figure 213 Configuration > System > Console Speed The following table describes the labels in this screen. Table 178 Configuration > System > Console Speed LABEL DESCRIPTION Console Port Speed Use the drop-down list box to change the speed of the console port. Your NXC supports 9600, 19200, 38400, 57600, and 115200 bps (default) for the console port. Apply Reset The Console Port Speed applies to a console port connection using terminal emulation software and NOT the Console in the NXC Web Configurator Status screen. Click Apply to save your changes back to the NXC. Click Reset to return the screen to its last-saved settings. 33.5 DNS Overview DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice versa. The DNS server is extremely important because without it, you must know the IP address of a machine before you can access it. 33.5.1 DNS Server Address Assignment The NXC can get the DNS server addresses in the following ways. • The ISP tells you the DNS server addresses, usually in the form of an information sheet, when you sign up. If your ISP gives you DNS server addresses, manually enter them in the DNS server fields. NXC5200 User's Guide 469