ZyXEL Omni 56K USB Plus User Guide - Page 48
Table 4-16 Extended S-Registers ATSn=x, COMMAND, FUNCTION AND DESCRIPTION
View all ZyXEL Omni 56K USB Plus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Omni 56K Plus Series User's Guide Table 4-16 Extended S-Registers "ATSn=x" COMMAND BIT DEC HEX FUNCTION AND DESCRIPTION 0,1 0 0 Even parity 1 1 Odd parity 2 2 No parity 2 0 0 1 stop bit 4 4 2 stop bits 4,3 0 0 10 bit character length 8 8 11 bit character length 16 10 9 bit character length 24 18 8 bit character length 7-5 0 0 Profile 0 as active settings after power on. 32 20 Profile 1 as active settings after power on. 64 40 Profile 2 as active settings after power on. 96 60 Profile 3 as active settings after power on 128 80 Factory default as active settings after power on S16= dec hex Test status register. 0 0 No test in progress. 1 1 Analog Loop-back test in progress. 3 3 Local Digital Loop-back test in process. 6 6 Remote Digital Loop-back test in process. 7 7 Remote Digital Loop-back with self-test in process. 8 8 Analog Loop back with self-test in progress. S17= bit dec hex Bit-mapped register. 4-1 0-30 0-1E Set transmit power level from 0 to -15 dBm. (See also S35b3) (Default *P11) 5 0 0 Normal dial. (Default) 32 20 Reverse dial, go on-line in answer mode. 7, 6 0 0 AT Commands set 64 40 V.25bis command set 128 80 Dumb mode (no command accepted) S18= dec hex Force modem to fix baud rate when answering. 0 0 Disable fixed baud function. 1-46 1-2E Enable baud rate to be fixed when answering. Baud rate value settings (n) the same as S20 S19= dec hex Modem connection mode, same 0-99 0-63 Setting value as 'AT&Nn' command. S20= dec hex DTE speed (bps). Auto detected from AT Command. REF. * * *C0* *C1 *C2 *C3 Z0 Z1 Z2 Z3 Z4* +000 &T0 &T1 &T3 &T6 &T7 &T8 +022 *Pn D DR *I0* *I1 *I2 +000 * +000/&Nn +001 4-20 Command Sets