ZyXEL P-201 User Guide - Page 97
Boot module commands, Command Interpreter Mode
View all ZyXEL P-201 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Prestige 201 ISDN Access Router 8.4 Boot module commands Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give the console port speed following the colon in the list of numbers that follows; e.g. ATBA3 will give a console port speed of 9.6 Kbps. ATSE displays the seed that is used to generate a password to turn on the debug flag in the firmware. The ATSH command shows product related information such as boot module version, vendor name, product model, RAS code revision, ISDN code revision, etc. ======= Debug Command Listing ======= ATHE print help ATGO boot system ATUR upload RAS code ATLC upload RAS configuration file ATBAx change baud rate. 1:38.4,2:19.2,3:9.6,4:57.6,5:115.2 ATTD download configuration to PC ATSE display seed for password generation ATSH display Revision and etc Figure 8-12 Boot module commands 8.5 Command Interpreter Mode This option allows you to enter the command interpreter mode. A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send email to the ZyXEL Support Group. Enter Menu Selection Number: 8 Copyright (c) 1999 ZyXEL Communications Corp. ras> ? Valid commands are: sys exit device isdn ip ppp dcp ether hdap System Maintenance Figure 8-13 Command mode 8-13