ZyXEL P-660H-D3 User Guide - Page 129
Table 31, Label, Description
View all ZyXEL P-660H-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Chapter 8 Wireless LAN See Section 8.8.2 on page 139 for detailed definitions of the terms listed in this screen. Figure 45 Network > Wireless LAN > AP: Advanced Setup The following table describes the labels in this screen. Table 31 Network > Wireless LAN > AP: Advanced Setup LABEL DESCRIPTION RTS/CTS Threshold Enter a value between 0 and 2347. Fragmentation Threshold This is the maximum data fragment size that can be sent. Enter a value between 256 and 2346. Output Power Set the output power of the ZyXEL Device. If there is a high density of APs in an area, decrease the output power to reduce interference with other APs. Select one of the following: 100%, 75%, 50% or 25%. Preamble Select a preamble type from the drop-down list menu. Choices are Long or Short. See the Appendix D on page 331 for more information. 802.11 Mode Select 802.11b Only to allow only IEEE 802.11b compliant WLAN devices to associate with the ZyXEL Device. Select 802.11g Only to allow only IEEE 802.11g compliant WLAN devices to associate with the ZyXEL Device. Select 802.11b+g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL Device might be reduced. Select 802.11n to allow only IEEE 802.11n compliant WLAN devices to associate with the ZyXEL Device. Select 802.11g+n to allow either IEEE 802.11g or IEEE 802.11n compliant WLAN devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL Device might be reduced. Select 802.11b+g+n to allow IEEE 802.11b, IEEE 802.11g or IEEE802.11n compliant WLAN devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL Device might be reduced. ADSL Router Series User's Guide 129