ZyXEL P-660H-T1 v2 Quick Start Guide - Page 3
Hardware Connections, ETHERNET, POWER
View all ZyXEL P-660H-T1 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
P-660H-Tx v2 Quick Start Guide 1 Hardware Connections 1 DSL: Use the gray telephone wire to connect your P-660H-Tx v2's DSL port to a telephone jack (or to a splitter, if one is already installed). 2 ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET port for initial configuration and/or Internet access. 3 POWER: Use the power adaptor provided with your P-660H-Tx v2 to connect an appropriate power source to the POWER socket. Make sure the power source is on. 4 Push in the POWER button. 5 Look at the lights on the front panel. 3
P-660H-Tx v2 Quick Start Guide
3
1 Hardware Connections
1 DSL
: Use the gray telephone wire to connect your P-660H-Tx v2’s
DSL
port to a telephone jack (or to a
splitter, if one is already installed).
2 ETHERNET
: Use the yellow Ethernet cable to connect a computer to an
ETHERNET
port for initial
configuration and/or Internet access.
3 POWER
: Use the power adaptor provided with your P-660H-Tx v2 to connect an appropriate power source
to the
POWER
socket. Make sure the power source is on.
4
Push in the
POWER
button.
5
Look at the lights on the front panel.