ZyXEL P-660HW-T3 v3 User Guide - Page 276
The Telnet Screen
View all ZyXEL P-660HW-T3 v3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
Chapter 18 Remote Management The following table describes the labels in this screen. Table 81 Advanced > Remote Management > WWW LABEL DESCRIPTION Port You may change the server port number for a service, if needed. However, you must use the same port number in order to use that service for remote management. Access Status Select the interface(s) through which a computer may access the ZyXEL Device using this service. Secured Client A secured client is a "trusted" computer that is allowed to communicate IP with the ZyXEL Device using this service. Select All to allow any computer to access the ZyXEL Device using this service. Apply Cancel Choose Selected to just allow the computer with the IP address that you specify to access the ZyXEL Device using this service. Click this to save your changes. Click this to restore your previously saved settings. 18.3 The Telnet Screen You can use Telnet to access the ZyXEL Device's command line interface. Specify which interfaces allow Telnet access and from which IP address the access can come. Click Advanced > Remote MGMT > Telnet tab to display the screen as shown. Figure 119 Advanced > Remote Management > Telnet 276 P-660HW-Tx v3 Series User's Guide