ZyXEL P-660R-D1 User Guide - Page 125
The AP Screen
View all ZyXEL P-660R-D1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 8 Wireless LAN 8.2 The AP Screen Use this screen to configure the wireless settings of your ZyXEL Device. Click Network > Wireless LAN to open the AP screen. Figure 41 Network > Wireless LAN > AP The following table describes the labels in this screen. Table 27 Network > Wireless LAN > AP LABEL DESCRIPTION Wireless Setup Enable Wireless Click the check box to activate wireless LAN. LAN Channel Selection Set the operating channel manually by selecting a channel from the Channel Selection list or use Auto Channel Select to have it automatically configured. Common Setup Network Name (SSID) The SSID (Service Set IDentity) identifies the service set with which a wireless device is associated. Wireless devices associating to the access point (AP) must have the same SSID. Enter a descriptive name (up to 32 printable 7-bit ASCII characters) for the wireless LAN. Hide SSID Security Mode MAC Filter Note: If you are configuring the ZyXEL Device from a computer connected to the wireless LAN and you change the ZyXEL Device's SSID or WEP settings, you will lose your wireless connection when you press Apply to confirm. You must then change the wireless settings of your computer to match the ZyXEL Device's new settings. Select this check box to hide the SSID in the outgoing beacon frame so a station cannot obtain the SSID through scanning using a site survey tool. See the following sections for more details about this field. This shows whether the wireless devices with the MAC addresses listed are allowed or denied to access the ZyXEL Device using this SSID. ADSL Router Series User's Guide 125