ZyXEL P-661H-D3 User Guide - Page 120
Table 16, Network Settings, Wireless, General, Secure, Security Mode
![]() |
View all ZyXEL P-661H-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Chapter 6 Wireless Click Network Settings > Wireless to display the General screen. Select More Secure as the security level. Then select WPA or WPA2 from the Security Mode list. Figure 27 Wireless > General: More Secure: WPA(2) The following table describes the labels in this screen. Table 16 Wireless > General: More Secure: WPA(2) LABEL DESCRIPTION Security Level Select More Secure to enable WPA(2)-PSK data encryption. Security Mode Choose WPA or WPA2 from the drop-down list box. Authentication Server IP Address Enter the IP address of the external authentication server in dotted decimal notation. Port Number Enter the port number of the external authentication server. The default port number is 1812. You need not change this value unless your network administrator instructs you to do so with additional information. Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be shared between the external authentication server and the ZyXEL Device. more.../hide more WPA Compatible The key must be the same on the external authentication server and your ZyXEL Device. The key is not sent over the network. Click more... to show more fields in this section. Click hide more to hide them. This field is only available for WPA2. Select this if you want the ZyXEL Device to support WPA and WPA2 simultaneously. 120 P-661HNU-Fx User's Guide
![](/manual_guide/products/zyxel-p661h61-user-guide-c365253/120.png)