ZyXEL P-661H-D3 User Guide - Page 223
Security > VPN > Setup > Edit, Table 58
View all ZyXEL P-661H-D3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Chapter 16 VPN Table 58 Security > VPN > Setup > Edit LABEL DESCRIPTION Tunnel Name Type up to 32 characters to identify this VPN policy. You may use any character, including spaces, but the ZyXEL Device drops trailing spaces. Mode Select net-net or Roadwarrior from the drop-down list box. Multiple SAs connecting through a secure gateway must have the same negotiation mode. Local Specify the IP addresses of the devices behind the ZyXEL Device that can use the VPN tunnel. The local IP addresses must correspond to the remote IPSec router's configured remote IP addresses. Local Address Type IP Address Start End / Subnet Mask Remote Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Use the drop-down menu to choose Single, or Subnet. Select Single for a single IP address. Select Subnet to specify IP addresses based on the subnet mask. When the Local Address Type field is configured to Single, enter a (static) IP address on the LAN behind your ZyXEL Device. When the Local Address Type field is configured to Subnet, enter an IP address on the LAN behind your ZyXEL Device. When the Local Address Type field is configured to Single, this field is N/A. When the Local Address Type field is configured to Subnet, enter the subnet of the LAN behind your ZyXEL Device. Specify the IP addresses of the devices behind the remote IPSec router that can use the VPN tunnel. The remote IP addresses must correspond to the remote IPSec router's configured local IP addresses. Remote Address Type IP Address Start End / Subnet Mask Address Information WAN Interface My IP Address Two active SAs cannot have the local and remote IP address(es) both the same. Two active SAs can have the same local or remote IP address, but not both. You can configure multiple SAs between the same local and remote IP addresses, as long as only one is active at any time. Use the drop-down menu to choose Single, or Subnet. Select Single for a single IP address. Select Subnet to specify IP addresses based on the subnet mask. When the Remote Address Type field is configured to Single, enter a (static) IP address on the network behind the remote IPSec router. When the Remote Address Type field is configured to Subnet, enter an IP Address on the LAN behind the IPSec router. When the Remote Address Type field is configured to Single, this field is N/A. When the Remote Address Type field is configured to Subnet, enter the subnet of the LAN behind the IPSec router. The interface used to connect to the internet My IP Address only shows the IP of the selected interface. There is no need to modify this information. P-661HNU-Fx User's Guide 223