ZyXEL P-792H v2 User Guide - Page 228
The SNMP Screen
View all ZyXEL P-792H v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
Chapter 17 Remote Management The following table describes the labels in this screen. Table 71 Advanced > Remote Management > FTP LABEL DESCRIPTION Port You may change the server port number for a service, if needed. However, you must use the same port number in order to use that service for remote management. Access Status Select the interface(s) through which a computer may access the P792H v2 using this service. Secured Client A secured client is a "trusted" computer that is allowed to communicate IP with the P-792H v2 using this service. Select All to allow any computer to access the P-792H v2 using this service. Apply Cancel Choose Selected to just allow the computer with the IP address that you specify to access the P-792H v2 using this service. Click this to save your changes. Click this to restore your previously saved settings. 17.5 The SNMP Screen Simple Network Management Protocol (SNMP) is a protocol used for exchanging management information between network devices. SNMP is a member of the TCP/IP protocol suite. Your P-792H v2 supports SNMP agent functionality, which allows a manager station to manage and monitor the P-792H v2 through the network. The P-792H v2 supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure illustrates an SNMP management operation. 228 P-792H v2 User's Guide