ZyXEL PLA401 v2 User Guide - Page 53
About Screen, About
View all ZyXEL PLA401 v2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 5 The Configuration Utility The following table describes the labels in this screen. Table 8 Advanced Screen LABEL DESCRIPTION Adapter This field identifies which powerline network information is displayed. Different powerline networks are identified by the Ethernet interface (network card) on your computer which is connected directly to a powerline adapter. Typically there is only one connection. However, if your computer has two network cards and both are connected to a powerline adapter, then you have two powerline networks. Site This field displays: • Local, if it is the PLA-4xx directly connected to the computer running the configuration utility. • Remote, if it is a powerline adapter in your powerline network but not directly connected to the computer running the configuration utility. MAC Address This is a read-only field which shows the MAC address of the powerline adapter you are configuring. You can find the MAC address of your PLA-4xx displayed on a sticker on the bottom of your device. Priority Select a priority setting from the drop-down box for traffic FROM your selected device. The options, in order of importance, are High, Medium, Normal and Low. Save Click this to apply your changes. The new Priority setting is applied to the selected powerline adapter. 5.7 About Screen Use the About screen to view information regarding the configuration utility and firmware version of the PLA-4xx you are connected to. Click the icon in the top right corner of the utility to view the About screen. Figure 30 About Screen Upgrade to latest version firmware and utility. The following table describes the labels in this screen. Table 9 About Screen LABEL DESCRIPTION Utility version: This field displays the software version of the configuration utility. Firmware version This field displays the firmware version of the device you selected in the Device Selection field of the Configuration screen. In the example firmware version given in the screen, 3-0-3052, the firmware version is shown by the numbers 305, meaning this is firmware version 3.0.5. If your device's firmware is earlier than 3.0.5, please use the Firmware Upgrade Tool to upgrade your firmware. PLA-4xx Series User's Guide 53