ZyXEL VSG1432-B101 User Guide - Page 316
Firmware Specifications - default admin password
View all ZyXEL VSG1432-B101 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Chapter 35 Product Specifications Table 112 Hardware Specifications (continued) Operation Humidity 20% ~ 85% RH (non-condensing) Storage Humidity 20% ~ 90% RH (non-condensing) 35.2 Firmware Specifications 316 Table 113 Firmware Specifications Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) Default User Name admin Default Password 1234 DHCP Server IP Pool 192.168.1.33 to 192.168.1.132 Static Routes 16 Device Management Use the web configurator to easily configure the rich range of features on the ZyXEL Device. Wireless Functionality (wireless devices only) Allow the IEEE 802.11b, IEEE 802.11g and/or IEEE 802.11n wireless clients to connect to the ZyXEL Device wirelessly. Enable wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Firmware Upgrade Download new firmware (when available) from the web site and use the web configurator to put it on the ZyXEL Device. Note: Only upload firmware for your specific model! Configuration Backup Make a copy of the ZyXEL Device's configuration. You can put it & Restoration back on the ZyXEL Device later if you decide to revert back to an earlier configuration. Port Forwarding If you have a server (mail or web server for example) on your network, you can use this feature to let people access it from the Internet. DHCP (Dynamic Host Configuration Protocol) Use this feature to have the ZyXEL Device assign IP addresses, an IP default gateway and DNS servers to computers on your network. Your device can also act as a surrogate DHCP server (DHCP Relay) where it relays IP address assignment from the actual real DHCP server to the clients. Dynamic DNS Support With Dynamic DNS (Domain Name System) support, you can use a fixed URL with a dynamic IP address. You must register for this service with a Dynamic DNS service provider. IP Multicast IP multicast is used to send traffic to a specific group of computers. The ZyXEL Device supports versions 2 and 3 of IGMP (Internet Group Management Protocol) used to join multicast groups (see RFC 2236). Time and Date Get the current time and date from an external server when you turn on your ZyXEL Device. You can also set the time manually. These dates and times are then used in logs. VSG1432-B101 Series User's Guide