ZyXEL Vantage Report User Guide - Page 570
Interface Usage
View all ZyXEL Vantage Report manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 570 highlights
Chapter 14 System Setting Table 253 System Setting > Rule-based Alert > Add/Edit > Port Usage LABEL DESCRIPTION Traffic.. KBytes/s Set your filters according to how much system resources are being consumed by monitored devices. The following parameters can be used. Period.. minutes • >= - Select this if you want to be alerted when a device uses resources greater than or equal to the value you set. • - Select this if you want to be alerted when a device uses resources less than the value you set. For example, choose Port1 port and Tx direction, select >= and set the percentage value to 100 KByte/s. This means Vantage Report sends an alert once a monitored device uses or exceeds 100 KBytes/s outgoing traffic on port 1 for a set time (see Period.. minutes field below). Set this to the number of minutes the condition persists before Vantage Report sends out an alert. Using the previous example, you can set the period to 5 minutes. This means that if the device reaches or exceeds 100 KByte/s of outgoing port traffic for 5 minutes, Vantage Report sends out an alert. See Section Table 252 on page 568 for descriptions of other table fields found in this screen. 14.7.1.3 Interface Usage Use this screen to configure an alert rule for interface type (such as Ethernet, VLAN or Bridge) used by the selected device(s). Note: This condition filter only applies to the ZLD platform type. Click System Setting > Rule-based Alert then either click on the link of the existing Rule Name or click Add. Select Interface Usage in the Condition field. The fields in the Filter section change to the following. Figure 274 System Setting > Rule-based Alert > Add/Edit > Interface Usage 570 Vantage Report User's Guide