ZyXEL Vantage Report User Guide - Page 575
System Setting > Rule-based Alert > Add/Edit > Service
View all ZyXEL Vantage Report manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 575 highlights
Chapter 14 System Setting The fields above are described in the following table. Table 257 System Setting > Rule-based Alert > Add/Edit > Service LABEL DESCRIPTION Condition Select Bandwidth in this field. Traffic.. KBytes/s Set your filters according to how much system resources are being consumed by monitored devices. The following parameters can be used. • >= - Select this if you want to be alerted when a device uses resources greater than or equal to the value you set. • - Select this if you want to be alerted when a device uses resources less than the value you set. Period.. minutes For example, select >= and set the percentage value to 100 KByte/s. This means Vantage Report sends an alert once a monitored device uses or exceeds 100 KBytes/s bandwidth for a set time (see Period.. minutes field below). Set this to the number of minutes the condition persists before Vantage Report sends out an alert. Using the previous example, you can set the period to 5 minutes. This means that if the device reaches or exceeds 100 KByte/s of bandwidth for 5 minutes, Vantage Report sends out an alert. See Section Table 252 on page 568 for descriptions of other table fields found in this screen. Vantage Report User's Guide 575