ZyXEL WRE2206 User Guide - Page 55
WRE2206 Access and Login
View all ZyXEL WRE2206 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Chapter 10 Troubleshooting 10.2 WRE2206 Access and Login I don't know the IP address of my WRE2206. 1 Click Start > Run, enter cmd, and then enter Ping zyxelsetup. You can find the MAC address on a label on the WRE2206. 2 The default URL is http://zyxelsetup. The default IP address is 192.168.1.2. 3 If you changed the IP address and have forgotten it, you might get the IP address of the WRE2206 by looking up the IP address of the default gateway for your computer. To do this in most Windows computers, click Start > Run, enter cmd, and then enter ipconfig. The IP address of the Default Gateway might be the IP address of the WRE2206 (it depends on the network), so enter this IP address in your Internet browser. Login (see the Quick Start Guide for instructions) and go to the Device Information table in the Status screen. Your WRE2206's IP address is available in the Device Information table. • If the DHCP setting under LAN information is None, your device has a fixed IP address. • If the DHCP setting under LAN information is Client, then your device receives an IP address from a DHCP server on the network. 4 If your WRE2206 is a DHCP client, you can find your IP address from the DHCP server. This information is only available from the DHCP server which allocates IP addresses on your network. Find this information directly from the DHCP server or contact your system administrator for more information. 5 Reset your WRE2206 to change all settings back to their default. This means your current settings are lost. See Section 10.4 on page 58 in the Troubleshooting for information on resetting your WRE2206. I forgot the username and password. 1 The default username is admin and default password is 1234. 2 If this does not work, you have to reset the device to its factory defaults. See Section 10.4 on page 58. I cannot see or access the Login screen in the Web Configurator. 1 Make sure you are using the correct URL and IP address. • The default URL is http://zyxelsetup. The default IP address is 192.168.1.2. • If you changed the IP address, use the new IP address. WRE2206 User's Guide 55