ZyXEL WX3310-B0 User Guide - Page 13
Back Panel
![]() |
View all ZyXEL WX3310-B0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Chapter 1 Introduction Table 1 Front Panel LEDs (continued) LED COLOR STATUS DESCRIPTION Repeater Mode Link Quality (wireless connection) Green Amber On Blinking On Blinking Link quality is good. Link quality is good, but not synced with the Zyxel MPro Mesh gateway (router controller). (see Chapter 12 on page 79 for more information on Easy Mesh) Place the WX3310 further from the modem/router. Place the WX3310 further from the modem/router. Not synced with the Zyxel MPro Mesh gateway (router controller). (see Chapter 12 on page 79 for more information on Easy Mesh) Red On Place the WX3310 closer to the modem/router. Blinking Place the WX3310 closer to the modem/router. Not synced with the Zyxel MPro Mesh gateway (router controller). (see Chapter 12 on page 79 for more information on Easy Mesh) Off There is no connection to the modem/router. WiFi Green On The 2.4G and 5G wireless radios are ready. Blinking Sending and receiving data. Off The 2.4G or 5G wireless radio is not ready or has failed. POWER Green Red On Blinking On Blinking Off The WX3310 is ready. The WX3310 is booting. System failure. Firmware upgrading. The WX3310 is not receiving power or is turned off. 1.5 Back Panel The following figure is the back panel of the WX3310. WX3310-B0 User's Guide 13
![](/manual_guide/products/zyxel-wx3310b0-user-guide-45c3164/13.png)