ZyXEL ZyWALL 5 UTM User Guide - Page 770
Note: Only upload firmware for your specific model
View all ZyXEL ZyWALL 5 UTM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 770 highlights
Chapter 55 Product Specifications Table 269 Firmware Specifications FEATURE DESCRIPTION Default IP Address 192.168.1.1 Default Subnet Mask 255.255.255.0 (24 bits) Default Password 1234 Default DHCP Pool 192.168.1.33 to 192.168.1.160 Device Management Use the web configurator to easily configure the rich range of features on the ZyWALL. Wireless Functionality Allow the IEEE 802.11b and/or IEEE 802.11g wireless clients to connect to the ZyWALL wirelessly. Enable wireless security (WEP, WPA(2), WPA(2)-PSK) and/or MAC filtering to protect your wireless network. Firmware Upgrade Download new firmware (when available) from the ZyXEL web site and use the web configurator, an FTP or a TFTP tool to put it on the ZyWALL. Configuration Backup & Restoration Network Address Translation (NAT) Port Forwarding DHCP (Dynamic Host Configuration Protocol) Dynamic DNS Support IP Multicast IP Alias Time and Date Logging and Tracing PPPoE PPTP Encapsulation Universal Plug and Play (UPnP) RoadRunner Support Note: Only upload firmware for your specific model! Make a copy of the ZyWALL's configuration. You can put it back on the ZyWALL later if you decide to revert back to an earlier configuration. Each computer on your network must have its own unique IP address. Use NAT to convert your public IP address(es) to multiple private IP addresses for the computers on your network. If you have a server (mail or web server for example) on your network, you can use this feature to let people access it from the Internet. Use this feature to have the ZyWALL assign IP addresses, an IP default gateway and DNS servers to computers on your network. With Dynamic DNS (Domain Name System) support, you can use a fixed URL, www.zyxel.com for example, with a dynamic IP address. You must register for this service with a Dynamic DNS service provider. IP multicast is used to send traffic to a specific group of computers. The ZyWALL supports versions 1 and 2 of IGMP (Internet Group Management Protocol) used to join multicast groups (see RFC 2236). IP alias allows you to subdivide a physical network into logical networks over the same Ethernet interface with the ZyWALL itself as the gateway for each subnet. Get the current time and date from an external server when you turn on your ZyWALL. You can also set the time manually. These dates and times are then used in logs. Use packet tracing and logs for troubleshooting. You can send logs from the ZyWALL to an external syslog server. PPPoE mimics a dial-up Internet access connection. Point-to-Point Tunneling Protocol (PPTP) enables secure transfer of data through a Virtual Private Network (VPN). The ZyWALL supports one PPTP connection at a time. A UPnP-enabled device can dynamically join a network, obtain an IP address and convey its capabilities to other devices on the network. The ZyWALL supports Time Warner's RoadRunner Service in addition to standard cable modem services. 770 ZyWALL 5/35/70 Series User's Guide