eMachines EL1360 User Guide - Page 48
Power, Printer
View all eMachines EL1360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Power Printer Chapter 3: Troubleshooting Your computer will not turn on • Make sure that the power cord is connected to an AC power source and to your computer, and that your computer is turned on. • If your computer is plugged into a surge protector, make sure that the surge protector is connected securely to an electrical outlet, turned on, and working correctly. To test the outlet, plug a working device, such as a lamp, into the outlet and turn it on. • Make sure that the power cord is free from cuts or damage. Replace any damaged cables. The printer will not turn on • Make sure that the printer is online. Many printers have an online/offline button that you may need to press. • Make sure that the power cable is plugged into an AC power source. The printer is on but will not print • Check the cable between the printer and your computer. Make sure that it is connected to the correct port. • Make sure that the printer is online. Many printers have an online/offline button that you may need to press so the printer can start printing. Press the button to put the printer online. • Check the cable for bent or broken pins. • If the printer you want to print to is not the default printer, make sure that you have selected it in the printer setup. • Reinstall the printer driver. See the guide that came with your printer for instructions on installing the printer driver. 38