eMachines eView_17s User Guide - Page 4

Technical information

Get eMachines eView_17s PDF manuals and user guides View all eMachines eView_17s manuals
Add to My Manuals
Save this manual to your list of manuals

Page 4 highlights

2.3 Self test pattern The monitor may display a three colors test pattern. This is to indicate that the monitor is functioning properly, but the computer's video signal is not reaching the monitor. In this case, please make sure the video cable is properly connected. The test pattern will disappear when the monitor is able to receive the video signal. However, if the test pattern does not display all three colors (blue, green and red), the monitor is not functioning properly. Please contact your local dealer for assistance. 2.4 Safety protection The safety protection function is protecting for the monitor itself. When frequency of video signal from computer's was out of range, (please refer to monitor "specifications") The monitor will protect by itself and a warning message of OSD will appear on the screen, warning you to resetting monitor type on your computer. 2.5 Timing guide This multi-scanning monitor can automatically detect and display several video modes. If the monitor recognizes one of preset timing signals, it will reset that mode and any stored display adjustments you have made. The factory preset modes as indicated in the following table Resolution Mode Fh. Fv. (dots x lines) 1 720 × 400 31.47 70 2 640 × 480 31.47 60 3 640 × 480 43.27 85 4 800 × 600 46.87 75 5 800 × 600 37.88 60 Fh: Horizontal Frequency (KHz) Fv: Vertical Frequency (Hz) Resolution Mode Fh. Fv. (dots x lines) 6 800 × 600 53.67 85 7 800 × 600 63.90 100 8 1024 × 768 48.36 60 9 1024 × 768 60.02 75 10 1024 × 768 68.67 85 3. Technical information 3.1 Products specifications Picture tube Size: Dot pitch: Surface / transmission: Maximum viewable area Display size (factory setting) Synchronization range Horizontal frequency: Vertical frequency: Max. Resolution Recommended resolution Dot Rate Power supply (universal) Input Voltage: Consumption: Input signal Display Analog Input Weight Net : Gross : Unit dimension (W x H x D) Operating condition Temperature: Humidity: Storage condition Temperature: Humidity: DDC1/DDC2B (Plug and Play) 17-inch (43.18 cm) diagonal 0.25mm Tinted screen glass non-glare, black matrix 16.02" (40.64cm) diagonal 305mm (H) x 228 mm (V) 12.00 inch (H) x 8.98 inch (V) ( Adjustable) 30-70KHz 50-160Hz 1280x1024 800x600 /85Hz 110MHz AC 100-240V，60/50 Hz 75 watts maximum. Video: Analog 0.7Vp-p / 75 Ohms Sync. : Separate sync. TTL level Unlimited Number of colors (depends upon video card) 18.5kg (40.7Lb) 21.0kg (46.2Lb) 406 x 407 x 417 (mm) 5°C~40°C (41°F to 104°F) 20﹪~ 80﹪ -20°~60°C (-4°F to 140°F) 10﹪~ 90﹪ VESA standard NOTE: All technical specifications are subject to change without notice. Page 4 Page 5

  • 1
  • 2
  • 3
  • 4
  • 5
2.3 Self test pattern
3. Technical information
The monitor may display a three colors test pattern. This is to indicate that the
monitor is functioning properly, but the computer’s video signal is not reaching
the monitor. In this case, please make sure the video cable is properly connected.
The test pattern will disappear when the monitor is able to receive the video signal.
However, if the test pattern does not display all three colors (blue, green and red),
the monitor is not functioning properly. Please contact your local dealer for
assistance.
3.1
Products specifications
Picture tube
Size:
Dot pitch:
Surface / transmission:
17-inch (43.18 cm) diagonal
0.25mm
Tinted screen glass non-glare, black matrix
Maximum viewable area
16.02” (40.64cm) diagonal
Display size (factory setting)
305mm (H) x 228 mm (V)
12.00 inch (H) x 8.98 inch (V) ( Adjustable)
Synchronization range
Horizontal frequency:
Vertical frequency:
30-70KHz
50-160Hz
Max. Resolution
1280x1024
Recommended resolution
800x600 /85Hz
Dot Rate
110MHz
Power supply (universal)
Input Voltage:
Consumption:
AC 100-240V
，
60/50 Hz
75 watts maximum.
Input signal
Video: Analog 0.7Vp-p / 75 Ohms
Sync. : Separate sync. TTL level
Display Analog Input
Unlimited Number of colors
(depends upon video card)
Weight
Net :
Gross :
18.5kg (40.7Lb)
21.0kg (46.2Lb)
Unit dimension (W x H x D)
406 x 407 x 417 (mm)
Operating condition
Temperature:
Humidity:
5
°
C~40
°
C (41
°
F to 104
°
F)
20
﹪
~ 80
﹪
Storage condition
Temperature:
Humidity:
-20
°
~60
°
C (-4
°
F to 140
°
F)
10
﹪
~ 90
﹪
DDC1/DDC2B (
Plug and Play)
VESA standard
2.4 Safety protection
The safety protection function is protecting for the monitor itself. When frequency
of video signal from computer’s was out of range, (please refer to monitor
“specifications”) The monitor will protect by itself and a warning message of OSD
will appear on the screen, warning you to resetting monitor type on your computer.
2.5 Timing guide
This multi-scanning monitor can automatically detect and display several video
modes. If the monitor recognizes one of preset timing signals, it will reset that
mode and any stored display adjustments you have made.
The factory preset modes as indicated in the following table
Mode
Resolution
(dots x lines
)
Fh.
Fv.
Mode
Resolution
(dots x lines)
Fh.
Fv.
1
720
×
400
31.47
70
6
800
×
600
53.67
85
2
640
×
480
31.47
60
7
800
×
600
63.90
100
3
640
×
480
43.27
85
8
1024
×
768
48.36
60
4
800
×
600
46.87
75
9
1024
×
768
60.02
75
5
800
×
600
37.88
60
10
1024
×
768
68.67
85
F
h:
Horizontal Frequency (KHz)
Fv
: Vertical Frequency (Hz)
NOTE:
All technical specifications are subject to change without notice.
Page 4
Page 5