iRobot Verro 100 Owners Manual - Page 24
Problem, Likely Cause, What to
View all iRobot Verro 100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Troubleshooting (cont...) Problem Verro reverses direction before reaching end of pool or Verro waits too long at side of pool before changing direction Likely Cause The filter bag needs to be cleaned Flaps in the vacuum intakes at bottom of robot are blocked Wheels or axles are not turning freely What to Do Clean the filter bag. (p. 15) Check the flaps in the vacuum intakes. (p. 22) Check wheels and axles for dirt and debris. The pump propeller is Clean the pump propeller. (p. 20) fouled by dirt or debris Verro does not reverse direction Locking pin position may Change locking pin position to lessen/ be causing too sharp/ increase degree of turn movement. narrow of a turn The direction flap is impeded Check the direction flap. (p. 22) Verro is not vacuuming well The filter bag needs to Clean the filter bag. (p. 15) be cleaned Flaps in the vacuum intakes at bottom of robot are blocked Check the flaps in the vacuum intakes. (p. 22) The pump propeller is Clean the pump propeller. (p. 20) fouled by dirt or debris 24 iRobot Verro Owner's Manual