iRobot Verro 100 Owners Manual - Page 4

 Tips Tip Clean the filter bag regularly. Verro uses the force of the water pumped through its filter bag to move properly. If the filter bag is not kept clean, Verro will not move or clean properly. Tip iRobot Verro 100 includes one fine filter bag, ideal for filtering small debris (algae, sand, etc.) and regular maintenance. Additional fine filter bags (as well as mesh filter bags, ideal for when the pool contains a significant quantity of large debris) are available for purchase at store.irobot.com Tip To keep the power cord from becoming kinked and tangled, always reverse the position of the locking pin to the opposing side of the axle after each use. Tip Periodically straighten the floating power cord with the Detangler. Tip Store your robot in a dry place out of direct sunlight at a temperature between 50 and 104 degrees Fahrenheit. The Power Supply is water resistant, but not waterproof and may be damaged by rain. Important: Failure to properly store Verro will result in loss of warranty. Tip The Verro 100 Power Supply has an automatic timer that shuts Verro OFF after approximately two hours of operation. When this happens, the power switch will remain ON. To start another cleaning cycle, switch the Power Supply OFF and then back ON and then press the reset button. Tip Periodically, clean filter bag using cold water only on gentle cycle. Never use detergents, fabric softeners, bleach or other additives and do not machine dry. This will cause permanent damage to your filter bag.  iRobot Verro Owner's Manual