iRobot Verro 300 Product Manual - Page 22

 Troubleshooting (cont...) Problem Verro reverses direction before reaching end of pool Likely Cause The filter bag needs to be cleaned Time control dial is not set properly What to Do Clean the filter bag. (p. 13) Set the time control dial. (p. 12) Flaps in the vacuum intakes at bottom of robot are blocked Check the flaps in the vacuum intakes. (p. 20) Wheels or axles are not Check wheels and axles for dirt turning freely and debris. The pump impeller is Clean the pump impeller. (p. 17) fouled by dirt or debris Verro waits too long at side of pool before changing direction The filter bag needs to be cleaned Time control dial is not set properly Clean the filter bag. (p. 13) Set the time control dial. (p. 12) Flaps in the vaccum intakes at bottom of robot are blocked Check the flaps in the vacuum intakes. (p. 20) Wheels or axles are not Check wheels and axles for dirt and debris. turning freely The pump impeller is Clean the pump impeller. (p. 17) fouled by dirt or debris Verro does not reverse direction Verro is not vacuuming well The direction baffle is impeded The filter bag needs to be cleaned Flaps in the vacuum intakes at bottom of robot are blocked The pump impeller is fouled by dirt or debris Check the direction baffle. (p. 20) Clean the filter bag. (p. 13) Check the flaps in the vacuum intakes. (p. 20) Clean the pump impeller. (p. 17) 22 iRobot Verro Owner's Manual