iRobot Verro 300 Product Manual - Page 23

 Troubleshooting (cont...) Problem Verro is not removing attached dirt and debris Likely Cause The filter bag needs to be cleaned What to Do Clean the filter bag. (p. 13) Flaps in the vacuum intakes at bottom of robot are blocked Check the flaps in the vacuum intakes. (p. 20) The pump impeller is Clean the pump impeller. (p. 17) fouled by dirt or debris Jet tube is blocked Clean jet tube. (p. 19) The floating power cord is tangled or kinked The floating power cord is twisted Verro gets stuck on The floating power cord its floating power cord is twisted Use Detangler to untwist the cord. (p. 16) Use Detangler to untwist the cord. (p. 16) Verro will not start a Reset required cleaning cycle Turn Power Supply OFF and then back ON. Press reset button. Verro is not plugged into the Power Supply Plug Verro into the Power Supply. The Power Supply is not Plug the Power Supply into GFCI outlet only. plugged in www.irobot.com 23