1998 Buick Park Avenue Owner's Manual - Page 188

dour tape bias is set automaticaliy. If E and a number appear on the radio display, the tape won't play because of an error. 0 Tine SEEM down md up mows will also find the previous and next selections ow the tape. El& The tape is tight and the player can't turn the tape hubs. Remove the tape. Hold the tape with the open end down and try to turn the right hub to the left with a pencil. Turn the tape over and repeat. If the hubs do not turn easily, your tape maybe damaged and should not be used in the player. Try 2 new tape to make sure your player is working properly. (4): Press this button to advance quickly to another part of the tape. Press the button again to return to playing speed. The radio will play while the tape advacces. .. 44 (3): Press this button to reverse the tape rapidly. Press it again to return to playing speed. The radio will play while the tape reverses. @ Ell: The tape is broken. Try a new tape. Hf m y emor occurs rcpestedly or if ;UI enor can't be corrected, picase contact your dealer. If your radio displays 211 error trunmber, write it down md provide it to your dealer when reporting the problem. PWEV (1): Press this button to search for the previous selection on the tape. Your tape must have at least three seconds of silence between each selection for PREV to work. The sound will mute while seeking. NEXT 42): Press this button to search for the next selection on the tape. Your tape must have at least three seconds of silence between each selection for NEXT to work. The sound will mute while seeking. SIDE (5): Press this button to change the side of the tape that is playing. RAND (6): Press this button to reduce background noise. The double-D symbol will appear in the display. Dolby Noise Reduction is mankafactrrred under a license from Dolby Laboratories Licensing Corporation. Dolby and the double-l) symbol are trademarks of Dolby Laboratories Licensing Corporation. SOURCE: Press this button to change to the tapeor disc function when the radio is on. If both a tape and a disc ape installed, the system will first go to tape play; TAPE SIDE and an arrow will appear on the display. If SOURCE is pressed again, the system will go to disc play; CD PLAY will appear onthe display.