2003 Buick Rendezvous Owner's Manual - Page 219

Tilt Mirror The tilt mirror feature can be programmed to one of the following modes: ON: The passengers side outside rearview mirror will tilt down towards the curb when the vehicle is shifted to REVERSE (R) and returns to its previous position when the vehicle is shifted out of REVERSE (R). OFF: The mirror will not tilt. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Follow the instructions for "Entering Programming Mode" listed previously. Exiting Programming Mode To exit programming mode, do one of the following: Shift out of PARK (P), turn the ignition key out of ON, or do not program any commands for one minute while in the programming mode. The programming mode message will turn to let you off know that you are no 1onge.r in the programming mode. Once you have reached the end of the personalization features, PERSONALIZATION SELECTION DONE will appear briefly. Then PRESS SET TO EXIT MODE TO CONTINUE will appear. Pressing SET will exit you out of the DIC. Pressing MODE will take you to the beginning of personalization. 2. Press the MODE button until TILT appears on the DIC. 3. Press the SET button until the arrow is before ON or OFF. The mode you selected is now set. You can either exit programming mode by following the instructions later in this section or program the next feature available on your vehicle. 3-68