2003 Buick Rendezvous Owner's Manual - Page 363

10. Put the bulb assembly back into the lamp housing and turn the bulb socket one-quarter of a turn clockwise. 11. Replace the applique on the liftgate. 12. Gently lift the liftgate. 13. Reinstall the seven wing nuts and the four outboard nuts. 14. Reinstall the panel inside the liftgate by connecting the tabs. 15. Close the liftgate. Replacement Bulbs A. Taillamp (outboard) B. Taillamp (center) C. Back-up Lamp (inboard) 6. Turn the bulb socket one-quarter of a turn counterclockwise. For any bulb not listed here contact your dealer. 7. Pull the bulb assembly out from the lamp housing. 8. Pull the bulb out of the base. 9. Install the new bulb into the electrical connector. Push the bulb firmly enough so that the tabs hook over the tab on the bulb. Bulb Number Lamp Front Turn SiqnaVParkinq Lamps 3457K 1 Headlamtx Hiah-Beam I 9005 I Headlamps Low-Beam I 9006 Liftgate-Mounted Back-up Lamps 921 161 Liftgate-Mounted Taillamps Rear Outboard Stop/Tail/Turn 3057K Sidemarker Lamps 168 I I 5-52