2014 Buick Verano Owner Manual - Page 273

Vehicle Care 10-19 { Warning You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol and it will burn if the engine parts are hot enough. Do not spill coolant on a hot engine. This will allow any pressure still left to be vented out the discharge hose. 2. Keep turning the pressure cap slowly and remove it. 3. Fill the coolant surge tank with the proper DEX-COOL coolant mixture to the indicated level mark. 4. With the coolant surge tank pressure cap off, start the engine and let it run until the upper radiator hose can be felt getting hot. Watch out for the engine cooling fan. Check the level in the coolant surge tank when the cooling system has cooled down. If the coolant is not at the proper level, repeat Steps 1- 3 and reinstall the pressure cap. If the coolant still is not at the proper level when the system cools down again, see your dealer. Engine Overheating The vehicle has an coolant temperature gauge to warn of the engine overheating. See Engine Coolant Temperature Gauge on page 5-11. If the decision is made not to lift the hood when this warning appears, get service help right away. See Roadside Assistance Program on page 13-5. If the decision is made to lift the hood, make sure the vehicle is parked on a level surface. Then check to see if the engine cooling fan is running. If the engine is overheating, the fan should be 1. Remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise about one-quarter of a turn. If you hear a hiss, wait for that to stop. By this time, the coolant level inside the coolant surge tank may be lower. If the level is lower, add more of the proper DEX-COOL coolant mixture to the coolant surge tank until the level reaches the indicated level mark. 5. Replace the pressure cap. Be sure the pressure cap is hand-tight.