2014 Buick Verano Owner Manual - Page 282

10-28 Vehicle Care Parking/Turn Signal Lamp 1. Open the hood. See Hood on page 10-4. 2. Remove the parking/turn signal lamp bulb socket from the headlamp assembly by turning counterclockwise. 3. Remove the bulb from the bulb socket by pulling it straight out. 4. Install the new bulb in the bulb socket. 5. Install the bulb socket into the headlamp assembly by turning clockwise. 3. Remove the bulb by turning it counterclockwise and pulling it straight out of the assembly. 4. Install the new bulb by turning it clockwise into the assembly. 5. Reverse Steps 1-3 to reinstall. 2. For the driver side bulb, remove the windshield washer bottle filler neck by firmly pulling it straight up and out of the bottle. 3. Remove the headlamp bulb access cover. 4. Turn the bulb counterclockwise and pull straight back. 5. Disconnect the wiring harness connector from the bulb. 6. Install the new bulb in the headlamp assembly by turning clockwise. 7. Reconnect the wiring harness connector. 8. Install the headlamp bulb access cover. 9. For the driver side, reinstall the windshield washer bottle filler neck by firmly pushing it straight into the bottle. Ensure that the filler neck clip engages into the underhood electrical center retainer. Taillamps, Turn Signal, Stoplamps, and Back-Up Lamps Trunk Deck Inboard Taillamp and Back-Up Lamp Fog Lamps To replace the front fog lamp bulb: 1. Locate the fog lamp located under the front fascia. 2. Disconnect the electrical connector from the fog lamp bulb assembly.