2014 Buick Verano Owner Manual - Page 331

Vehicle Care The bright metal moldings on the vehicle are aluminum. To prevent damage always follow these cleaning instructions: . 10-77 Cleaning Exterior Lamps/ Lenses, Emblems, Decals and Stripes Use only lukewarm or cold water, a soft cloth, and a car washing soap to clean exterior lamps, lenses and emblems. Follow instructions under "Washing the Vehicle" previously in this section. Lamp covers are made of plastic, and some have a UV protective coating. Use only lukewarm water, a soft cloth, and mild car washing soap to clean exterior lamps and lenses. Do not clean or wipe them while they are dry. Do not use any of the following on lamp covers: . . . Solvents, alcohols, fuels, or other harsh cleaners. Ice scrapers or other hard items. Aftermarket appearance caps or covers while the lamps are illuminated, due to excessive heat generated. . . Be sure the molding is cool to the touch before applying any cleaning solution. Use a cleaning solution approved for aluminum. Some cleaners are highly acidic or contain alkaline substances and can damage the moldings. Always dilute a concentrated cleaner according to the manufacturer 's instructions. Do not use chrome cleaners. Do not use cleaners that are not intended for automotive use. Use a nonabrasive wax on the vehicle after washing to protect and extend the molding finish. . { Caution Failure to clean lamps properly can cause damage to the lamp cover that would not be covered by the vehicle warranty. . . . { Caution Using wax on low gloss black finish stripes can increase the gloss level and create a non-uniform finish. Clean low gloss stripes with soap and water only. . Abrasive or caustic agents. Washer fluids and other cleaning agents in higher concentrations than suggested by the manufacturer.