1994 Cadillac Seville Owner's Manual - Page 277

How to Add Fluid Refer to theMaintenance Schedule to determine what kindof transaxle fluid to use. See "Recommended Fluidsand Lubricants" in the Index. If the fluid level is low, add only enough of the properfluid to bring the level into thecross-hatched area on the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at thedipstick hole to bring it to the proper 1evel.It doesn'ttake much fluid, generally less than a pint (OSL). Don't overfill. We recommend you use only fluid labeled DEXR0N'-IIE or DEXRON@-111, because fluids withthat label are made especially for your automatic transaxle. Damage caused by fluid other thanDEXR0N'-IIE or DEXRON@-I11 not is covered by your new vehicle warranty. After adding fluid, recheck fluid level as describedunder "How to the Check." When the correct fluid level isobtained, push the dipstick back in all the way. How To Reset Transaxle FluidChange Indicator: Your vehicle is equipped with a transaxle fluid change indicator. A "CHANGE TRANS FLUID" message will display theInformation on Center when the power train computer determines that thetransaxle fluid needs to be changed or ateach 100,000 miles (160,000 km) interval, whichever occurs first. When message appears, change the transaxle this fluid and reset the transaxle fluid life indicator as follows: Turn the key "ON" with the engine stopped. 0 Press and hold the "OFF" and "REAR DEFOG"buttons on the climate control simultaneously untilthe "TRANS FLUID RESET" message appears in the Information Center (between 5 and 20 seconds).