1994 Cadillac Seville Owner's Manual - Page 295

5. Press the bulb housing lever, rotate thehousing counterclockwise and remove it. Push and rotate thebulb counterclockwise to remove bulb. Once you havereplaced the burned out bulb, just reverse the steps to reassemble the taillight. VTPER BLADE REPLACEMENT Position the windshield wiperson the windshield inthe "mid" wipe position. To do this, turn theignition key to Accessory and turn the wipers on. Then with the door open, turn theignition key to off. Start with the driver side wiper blade assembly. Using a small screwdriver or your finger, gently lift the release lever up while at the same time pulling the blade assembly fromthe wiper arm. 282