1995 Cadillac Seville Owner's Manual - Page 182

Your Cassette Tape Player Your cassette tape player works best with tapes that are 30 to 45 minutes long on each side. Tapes longer than thatare so thin that they may not work well in this player. If you look at the tape, or onits labelor box, it should say whether its bias, p). or "equalization,"is 70 microseconds (70 p) or 120 microseconds (120 Chrome and metal tapes are 70 p sec and standard iron tapes are 120 p sec. Your tape player will adjust automaticallyfor either type of cassette tape. To Play a Cassette Tape 1. Turn the radio on. - 2. Insert the cassette through the tape door. (The TAPE indicator the in display will light.) If you hear nothingor hearjust a garbled sound, cassette may not be the in squarely. Press theEJCT button to removethe tape and start over. The tape equalization is automatically sensed and set. Inserting the cassette also activates DOLBY noise reduction. DNR@is the Dynamic Noise Reduction. Ithelps remove backgroundhiss noise from the radio. "DNR' is a registered trademarkof National Semiconductor Corporation. 3. Once the tapeis playing,use the upper andlower knobs to adjust the volume and balance, just you do for the radio. Press the upper knob as to change tape direction. The arrowin the display shows which direction thetape is being played. F D Press this button go forward rapidly to another part of the tape. W: to To The radio will play during fast forward. stop the tape, press the same button and the tape will start toplay. REV: Press this button to reverse the tape. To stop the tape,press the same buttonlightly or any of the other buttons. The radio play during will this reverse function. @ 3-13