1995 Cadillac Seville Owner's Manual - Page 313

If you onlywant to replace the wiper insert, follow these steps: 1. Position the windshield wipers on thewindshield in the MIDwipe position. To do this, turn theignition key to ACCESSORY and turn the wipers on. Thenwith the door open, turn the ignition key to OFF. 2. Insert the tipof a small screwdriver into the slot as shown and gently press down to release the wiper blade from the arm. 3. Insert asmall coin between the edge of the blade housing and the rubber blade insert. 4. Carefully apply pressure until the insert clearsone side of the housing tabs. 5. Now pull the insert from the blade housing. 6. Reinstall the new insert by aligning the blade housing tabs and the edge of the insert, starting with the second set from the outeredge. Make sure that the insertconnected to all of the housing tabs and is that it moves freely back and forth. 7. To install the wiper blade, align the wiper arm pin with the hole on the wiper blade assembly and snap it into place. Return thewipers to their normal position. 6-42