2004 Cadillac Escalade EXT Owner's Manual - Page 363

9. Remove the rubber, circular-shaped bulb cap of the affected bulb from the headlamp assembly. 15. Reconnect the electrical connector to the lower corner of the headlamp assembly. 10. Turn the bulb connector counterclockwise and remove it with the old bulb from the headlamp assembly. 11. Unplug the electrical connector from the old bulb. 12. Plug in the electrical connector to the new bulb, using care not to touch the bulb with your hands, fingers or anything damp or oily. 13. Place the connector with the new bulb into the headlamp assembly and turn it clockwise until it is tight. 14. Reinstall the rubber, circular-shaped bulb cap onto the headlamp assembly. 16. Place the headlamp assembly back into the vehicle, being sure to align the lower locator tab with the pocket on the vehicle (see arrow). Push the headlamp assembly straight in and then down into position. 17. Install the two pins and snap the ends into their locked position. 18. Reinstall the grille and radiator cover by reversing the removal procedure described previously. 5-57