1996 Chevrolet Corvette Owner's Manual - Page 264

Checking Brake Fluid You can checkthe brake fluid without taking off the cap. Just look at the brakefluid reservoir. The fluid level should be above the MIN mark on the reservoir. If it isn't, have your brakesystem checked to see if there is a leak. After work is done on the brake hydraulic system, make sure the levelis between the MIN and MAX marks. What toAdd When you do need brakefluid, use only DOT-3 brake fluid -- such as Delco Supreme 11 (GM Part No. 1052535). Use new brake fluid from a sealed container only, and alwaysclean the brake fluid reservoir cap before removing it. @ NOTICE: 0 Using the wrong fluid can badly damage a few brake system parts. For example, just drops of mineral-based oil, such as engine oil, in your brake system can damage brake system parts so badly that they'll have to be replaced. Don't let someone in the put wrong kind of fluid. If you spill brake fluidon your vehicle's painted surfaces, the paint finish can be damaged. Be careful not to spill brake fluid on your vehicle. If you do, wash it off immediately. See "Appearance Care" in the Index. With the wrong kind fluid in your brake of system, your brakes may not work or they well, may not even work all. This could cause at a crash. Always use the proper brake fluid. 1 6-33