2001 Chevrolet Corvette Owner's Manual - Page 75

Replacing the Battery in the Remote Keyless Entry Transmitter Resynchronizing Your Transmitter Your RKE system uses a continually changing code for increased security. Normally, the receiver in your vehicle will keep track of this changing code. If your vehicle does not respond to your transmitter, do the following to determine what's wrong: 1. Get closer to the vehicle and try pressing a button again. Your battery may be low. If so, see "Battery Replacement" in the Index. 2. While standing close to your vehicle, press the lock and unlock buttons on your transmitter at the same time and hold for seven seconds. This will attempt to resynchronize the security code in your RKE transmitter. 3. When resynchronization is achieved, the horn will chirp. 1. Insert a coin into the slot on the back of the transmitter and gently pry apart the front and back. 2. Gently pull the battery out of the transmitter. 3. Put the new battery in the transmitter, positive (+) side up. Use a battery, type CR2032, or equivalent. 4. Reassemble the transmitter. Make sure to put it together so water won't get in. 5. Test the transmitter. If attempts to resynchronize your transmitter to the vehicle are not successful, you may need to match the transmitter to the vehicle. See "Matching Transmitter(s) to Your Vehicle" in the Index. 2-13