2002 Chevrolet Impala Owner's Manual - Page 88
2002 Chevrolet Impala Manual
Page 88 highlights
TIRE MON (Tire Inflation Monitor Reset): This feature allows you to reset the tire pressure monitor after checking all tire pressures, see "Tires" in the Index. To clear the LOW TIRE PRESSURE light from the instrument panel cluster and reset the low tire pressure monitor: 1. Scroll, using the SEEK up or down arrows, until TIRE MON appears on the display. 2. Press the PREV or NEXT button to enter the submenu. RESET will be displayed. 3. Press the DISP button to reset. A chime will be heard to verify the new setting and DONE will be displayed for one second. The low tire pressure monitor is now reset. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. LT DELAY (Delayed Headlamp Illumination): This feature allows the headlamps and parking lamps to stay on for a fixed amount of time after you exit the vehicle. Programmable Modes Mode 1: OFF -- Turns feature off. Mode 2: 30 SEC -- 30 seconds. Mode 3: 60 SEC -- 60 seconds. Before your vehicle was shipped from the factory, it was programmed to Mode 2. The mode to which your vehicle was programmed may have been changed since it left the factory. To determine the mode to which your vehicle is programmed or to program your vehicle to a different mode, do the following: 1. Scroll, using the SEEK up or down arrows, until LT DELAY appears on the display. 2. Press the PREV or NEXT button to enter the submenu. The current selection will have an asterisk (*) next to it. If you do not wish to change the current mode, you can either exit the programming mode by following the directions later in this section or program the next feature available on your vehicle. 3. Scroll, using the PREV or NEXT buttons, through the modes to change the current mode. 4. With your preference displayed, press the DISP button to select. A chime will be heard to verify the new setting. The new selection will be displayed with an asterisk (*) for one second. The mode you selected is now set. You can either exit the programming mode by following the instructions later in this section or program the next feature available on your vehicle. 2-22