2010 Chevrolet Camaro Owner's Manual - Page 170

6-32 Infotainment System Call Waiting Call waiting must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 2. Say "Three-way call". The system responds "Three-way call, please say dial or call". 3. Use the dial or call command to dial the number of the third party to be called. 4. Once the call is connected, press bg to link all the callers together. Once connected, the person called will be heard through the audio speakers. Using the Re-dial Command 1. Press b g. The system responds "Ready" followed by a tone. 2. After the tone, say "Re-dial". The system responds "Re-dial using " and dials the last number called from the connected Bluetooth phone. Once connected, the person called will be heard through the audio speakers. • Press bg to answer an incoming call when another call is active. The original call is placed on hold. • Press bg again to return to the original call. • To ignore the incoming call, no action is required. Ending a Call Press c $ to end a call. • Press c $ to disconnect the current call and switch to the call on hold. Muting a Call During a call, all sounds from inside the vehicle can be muted so that the person on the other end of the call cannot hear them. To Mute a call 1. Press bg. The system responds "Ready" followed by a tone. 2. Say "Mute Call". The system responds "Call muted". Receiving a Call When an incoming call is received, the audio system mutes and a ring tone is heard in the vehicle. Three-Way Calling Three-Way Calling must be supported on the Bluetooth phone and enabled by the wireless service carrier to work. 1. While on a call press b g. The system responds "Ready" followed by a tone. • Press b g to answer the call. • Press c $ to ignore a call.