2010 Chevrolet Camaro Owner's Manual - Page 71
2010 Chevrolet Camaro Manual
Page 71 highlights
Seats and Restraints Do not fold the empty rear seat with a safety belt buckled. This could damage the safety belt or the seat. Unbuckle and return the safety belt to its stowed position, before folding the seat. 1. Attach and tighten the lower attachments to the lower anchors. If the child restraint does not have lower attachments or the desired seating position does not have lower anchors, secure the child restraint with the top tether and the safety belts. Refer to your child restraint manufacturer instructions and the instructions in this manual. 1.1. Find the lower anchors for the desired seating position. 1.2. Put the child restraint on the seat. 1.3. Attach and tighten the lower attachments on the child restraint to the lower anchors. 2. If the child restraint manufacturer recommends that the top tether be attached, attach and tighten the top tether to the top tether anchor, if equipped. Refer to the child restraint instructions and the following steps: 2.1. Find the top tether anchor. 2.2. Route, attach, and tighten the top tether according to your child restraint instructions and the following instructions: 2-47 If the position you are using does not have a headrest or head restraint and you are using a dual tether, route the tether over the seatback. 3. Push and pull the child restraint in different directions to be sure it is secure. If the position you are using does not have a headrest or head restraint and you are using a single tether, route the tether over the seatback.