2014 Chevrolet Tahoe Owner Manual - Page 371

Vehicle Care 6. Press a new bulb into the bulb socket and install the socket into the taillamp assembly by turning it clockwise. 7. Reinstall the taillamp assembly. When reinstalling, make sure to line up the pins on the taillamp assembly with the vehicle. If this is not done, the taillamp assembly will not be able to be installed correctly. 10-31 License Plate Lamp 5. Reverse Steps 1-3 to reinstall the license plate lamp. Replacement Bulbs Exterior Lamp Back-up Lamp License Plate Lamp Rear Turn Signal Lamp, Taillamp, and Stoplamp Side Marker Lamp 1. Remove the two screws holding each of the license plate lamps to the molding that is part of the liftgate. 2. Twist and pull the license plate lamp assembly forward through the molding opening. 3. Remove the bulb socket from the lamp assembly by turning it counterclockwise. 4. Pull the bulb straight out of the socket and install the new bulb. Bulb Number 7441 W5WLL 3057 KX RD 194 For replacement bulbs not listed here, contact your dealer.