2014 Chevrolet Tahoe Owner Manual - Page 407

Vehicle Care 7. Tilt the tire toward the vehicle with some slack in the cable to access the tire/wheel retainer. Separate the retainer from the guide pin by sliding the retainer up the pin while pressing down on the latch. 10-67 Removing the Flat Tire and Installing the Spare Tire 1. Do a safety check before proceeding. See If a Tire Goes Flat on page 10-62 for more information. nut caps will be retained in the hub cap after it is removed from the wheel. Once the retainer is separated from the guide pin, tilt the retainer and pull it through the center of the wheel along with the cable and latch. 8. Put the spare tire near the flat tire. 2. If the vehicle has a center cap that covers the wheel fasteners, place the chisel end of the wheel wrench in the slot on the wheel and gently pry the cap out. If the wheel has a bolt-on hub cap, loosen the plastic nut caps by turning the wheel wrench counterclockwise. The plastic 3. Use the wheel wrench to loosen all the wheel nuts. Turn the wheel wrench counterclockwise to loosen the wheel nuts. Do not remove the wheel nuts yet.