2014 Chevrolet Tahoe Owner Manual - Page 404

10-64 Vehicle Care A. Jack Knob B. Wing Nut Retaining the Tool Bag C. Wing Nut Retaining the Wheel Blocks 2. Turn the wing nut retaining the tool bag (B) counterclockwise to remove it. 3. Turn the jack knob (A) counterclockwise to release the jack and wheel blocks from the bracket. 4. Turn the wing nut retaining the wheel blocks (C) counterclockwise to remove the wheel blocks and the wheel block retainer. The following information explains how to use the jack and change a tire. Tire Changing Removing the Spare Tire and Tools The equipment needed to change a flat tire is stored under the storage tray, located on the driver side trim panel, over the rear wheelhouse. Regular Wheelbase Shown, Extended Wheelbase Similar 1. Remove the tray to access the tools by pulling up on the finger depression under the jack symbol.