2004 Chrysler Sebring Owner's Manual - Page 14
2004 Chrysler Sebring Manual
Page 14 highlights
14 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE Customer Key Programming You can program new keys to the system if you have two valid keys by doing the following: 1. Insert the first valid key into the ignition and turn the ignition On for at least 3 seconds but no longer than 15 seconds. Turn the ignition Off and remove the first key. 2. Insert the second valid key and switch the ignition On within 15 seconds. After ten seconds a chime will sound and the Theft Alarm Light will begin to flash. Turn the ignition Off and remove the second key. 3. Insert a blank Sentry Key into the ignition and switch the ignition On within 60 seconds. After 10 seconds a single chime will sound. The Theft Alarm Light will stop flashing, turn on for 3 seconds; then turn off. The new Sentry Key has been programmed. Repeat this process to program up to a total of 8 keys. General Information The Sentry Key system complies with FCC rules part 15. Operation is subject to the following two conditions: 1. this device may not cause harmful interference 2. this device must accept any interference that may be received, including interference that may cause undesired operation ILLUMINATED ENTRY SYSTEM The interior lights will come on when you open any door, unlock the vehicle with the remote keyless entry (if so equipped) or central unlock (if so equipped). They will remain on for about 30 seconds after all doors are closed then fade to off. The lights also will turn off if you turn on the ignition after you close all doors.