2005 Dodge Neon Owner Manual SRT-4 - Page 175

MAINTAINING YOUR VEHICLE 175 CAUTION! During installation, be sure when tightening the inboard screw, to only tighten until the rubber grommet on the screw starts to compress against the headlamp module housing. Front Park/Turn Signal Lights 1. Remove the headlight assembly 2. Twist the bulb socket 1/4 turn and remove. 3. Pull the bulb from the socket and replace. Front Sidemarker Light 1. Remove the screws and push-pins from the front fender splash shield. 2. Reach between the fender and the splash shield, grasp the bulb and socket assembly and turn it counterclockwise. Remove the bulb and socket assembly from the light housing. 3. Pull the bulb out of the socket and replace the bulb. Reinstall the bulb and socket assembly and replace the fender splash shield. 7